Exothermic Welding Fluxes

Bailijia Exothermic Welding can be used different metal's connection, it is the best connection between conductors and Earth Rod

1. Current carrying capability from welding point is same as conductor with good conducting performance. After inspection, the DC resistance ratio and change rate are almost zero before and after welding. this is the level that any of the traditional welding method can not be compared.

2.No need for rescources from outside. It can be operated indoor and outdoor.

3. It won't be damaged from surge current.The test shows the conductor will be melted earlier than welding points when under high current impact in short period.

4.Corrosion or slack will not be produced from welding. As it is weld junction, no contact surface, no residual stress, junction is stable and reliable as long term conductive body.

5. As it is welding junction, connector and conductor are combined on molecular. So it has a good mechanical strength and is a permanent junction.

6. Equipment is simple, convenient and handy. The operation is easy and can be done without professional